Extreme Networks ExtremeWare - Enable Web Https Access-Profile

enable web https access-profile
ExtremeWare Software 7.3.0 Command Reference Guide 913
enable web https access-profile
enable web https access-profile [none | <access-profile>] port <port
number>
Description
Allows HTTPS access on the specified (non-default) port.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to set up an access profile for a particular port number to restrict HTTPS usage.
Example
The following example enables HTTPS access using the access-profile named secure_web on port 120:
enable web https access-profile secure_web port 120
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
none Specifies to not to use an access-profile when accessing HTTPS.
access-profile Specifies the name of an access-profile to use when accessing HTTPS.
port number Specifies the port number to use to access HTTPS.