1488 ExtremeWare Software 7.3.0 Command Reference Guide
IP Multicast Commands
configure dvmrp vlan cost
configure dvmrp vlan [<vlan name> | all] cost <cost>
Description
Configures the cost (metric) of the interface.
Syntax Description
Default
The default setting is 1.
Usage Guidelines
The cost range is 1 - 32.
Example
The following command configures the cost (metric) of the interface on the VLAN accounting:
configure dvmrp vlan accounting cost 5
History
This command was available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
cost Specifies a cost metric.
To Next Page
Loading...