1028 ExtremeWare Software 7.3.0 Command Reference Guide
STP Commands
disable stpd
disable stpd {<spanning tree name>}
Description
Disables the STP protocol on a particular STPD or for all STPDs.
Syntax Description
Default
Disabled.
Usage Guidelines
All VLANs belong to an STPD. If you do not want to run STP on a VLAN, you must add the VLAN to
an STPD that is disabled.
The
spanning tree name
keyword is optional. You do not need to indicate an STPD name if you
disable the STP protocol for all STPDs.
Example
The following command disables an STPD named purple_st:
disable stpd purple_st
History
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
spanning tree name Specifies an STPD name on the switch.
To Next Page
Loading...