run ipfdb-check
ExtremeWare Software 7.3.0 Command Reference Guide 1237
run ipfdb-check
run ipfdb-check [index <bucket> <entry> | <ip-address> {<ip-address>}]
{extended} {detail}
Description
Checks IP FDB entries for consistency.
Syntax Description
Default
N/A.
Usage Guidelines
The IP FDB error checking function logs the error count into the system log. Use the
detail
option to
log more detailed debug information.
Example
The following command will do consistency checking on IP FDB entries for IP address 10.20.30.55:
run ipfdb-check 10.20.30.55
History
This command was first available in ExtremeWare 6.1.9
Platform Availability
This command is available on all platforms.
The
extended
option is available on the BlackDiamond switch only.
bucket Specifies the bucket portion of the FDB hash index.
entry Specifies the entry portion of the FDB hash index.
ip-address Specifies an IP address. FDB entries with this IP address will be checked.
ip-address Specifies a second IP address, for checking bi-directional entries.
extended Enables OTP index checking in the MAC entry and VPST of the egress port.
detail Specifies that more detailed debug information should be logged.
To Next Page
Loading...
Need help?
General
