configure time
ExtremeWare Software 7.3.0 Command Reference Guide 79
configure time
configure time <date> <time>
Description
Configures the system date and time.
Syntax Description
Default
N/A.
Usage Guidelines
The format for the system date and time is as follows:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format. The AM hours range from 1 through 11, and the PM hours range
from 12 through 23.
For ExtremeWare 6.0 and higher:
• You cannot set the year past 2035.
For ExtremeWare 2.0 and 4.x:
• You cannot set the year past 2023.
Example
The following command configures a system date of February 15, 2002 and a system time of 8:42 AM
and 55 seconds:
configure time 02/15/2002 08:42:55
History
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
date Specifies the date in mm/dd/yyyy format.
time Specifies the time in hh:mm:ss format.
To Next Page
Loading...