disable wanqos
ExtremeWare Software 7.3.0 Command Reference Guide 1727
disable wanqos
disable wanqos {ports <portlist> | multilink <groupname>}
Description
Disables WAN QoS for T1 and E1 ports.
Syntax Description
Default
WAN QoS is disabled by default.
Usage Guidelines
This command disables WAN QoS for T1 and E1 links. There is no equivalent command for T3 links.
Example
The following command disables WAN QoS on ports 1:1 and 1:3:
disable wanqos ports 1:1,1:3
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
portlist A list of ports.
groupname A multilink group name.
To Next Page
Loading...