1318 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
configure rip garbagetime
configure rip garbagetime {<seconds>}
Description
Configures the RIP garbage time.
Syntax Description
Default
120 seconds.
Usage Guidelines
None.
Example
The following command configures the RIP garbage time to have a 60-second delay:
configure rip garbagetime 60
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
seconds Specifies a time in seconds.
To Next Page
Loading...