configure wireless default-gateway
ExtremeWare Software 7.3.0 Command Reference Guide 2005
configure wireless default-gateway
configure wireless default-gateway <ip_address>
Description
Configures the default gateway IP address.
Syntax Description
Default
0.0.0.0.
Usage Guidelines
The wireless default gateway IP address is usually set to the wireless management VLAN address. This
address is used by all wireless client traffic whose destination is upstream switches.
Example
The following example configures the switch level property for the default gateway:
configure wireless default-gateway 192.168.1.1
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
ip_address Indicates the IP address of the default gateway. By default, this is the same IP
address as the management VLAN.