1596 ExtremeWare Software 7.3.0 Command Reference Guide
IPX Commands
unconfigure ipxrip
unconfigure ipxrip {vlan <vlan name>}
Description
Resets the IPX/RIP settings on one or all VLANs to the default.
Syntax Description
Default
N/A.
Usage Guidelines
Removes import and export filters, and resets the MTU size, update interval, and inter-packet delay.
Example
The following command
unconfigure ipxrip vlan backbone
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
To Next Page
Loading...