configure wireless ports force-disassociation
ExtremeWare Software 7.3.0 Command Reference Guide 2009
configure wireless ports force-disassociation
configure wireless ports <portlist> force-disassociation [all-clients
[every <hour <0-23>> <minute <0-59>> | time <month <1-12>> <day> <year
<yyyy>> <hour <0-23>> <minute <0-59>>] | cancel-scheduler | <mac-address>]
Description
Configures the client force-disassociation capability.
Syntax Description
Default
No schedule.
Usage Guidelines
Force disassociation permits client user disassociation based on a recurring schedule, a date and time, or
a particular MAC address. You can also disassociate a user immediately. You can specify access based
on a preferred time periods, such as during off-hours, weekends, and holidays. You can also set up a
user policy on a RADIUS server to allow user authentication based on time of day.
Example
The following command configures ports 1:18 to force disassociate all clients every day at noon:.
configure wireless ports 1:18 force-disassociation all-clients every 12 0
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all-clients Specifies all clients associated with the port list.
every Specifies a repeating disassociation.
time Specifies a single disassociation at a specific time and date. If you do not
specify the every or time parameters, the user immediately disassociates.
cancel-scheduler Specifies to disable forced disassociation.
mac-address Specifies the MAC address of the client network interface card.
To Next Page
Loading...
Need help?
General
