1482 ExtremeWare Software 7.3.0 Command Reference Guide
IP Multicast Commands
clear igmp snooping
clear igmp snooping {vlan <vlan name>}
Description
Removes one or all IGMP snooping entries.
Syntax Description
Default
N/A.
Usage Guidelines
This command can be used by network operations to manually remove IGMP snooping entries
instantly. However, removing an IGMP snooping entry can disrupt the normal forwarding of multicast
traffic.
The static IGMP snooping entry will not be removed. The dynamic IGMP snooping entry will be
removed, then re-created upon the next general query.
Example
The following command clears IGMP snooping from VLAN accounting:
clear igmp snooping accounting
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
To Next Page
Loading...