1490 ExtremeWare Software 7.3.0 Command Reference Guide
IP Multicast Commands
configure dvmrp vlan import-filter
configure dvmrp vlan [<vlan name> | all] import-filter [<access profile> |
none]
Description
Configures DVMRP to filter certain routes received from its neighbor, and uses an access profile to
determine which DVMRP routes are accepted as valid routes.
Syntax Description
Default
None.
Usage Guidelines
Use this command to filter out certain routes when accepting routes from its neighbors. The filtered
routes are specified in an access profile.
Example
The following command configures DVMRP to use the nosales access profile to determine which
DVMRP routes are to accept:
configure dvmrp vlan accounting import-filter nosales
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
access profile Specifies an access profile name.
none Deletes any associated filter.
To Next Page
Loading...
Need help?
General
