configure ospf area delete range
ExtremeWare Software 7.3.0 Command Reference Guide 1295
configure ospf area delete range
configure ospf area <area identifier> delete range <ipaddress> <mask>
Description
Deletes a range of aggregated IP addresses in an OSPF area.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes an aggregated IP address range:
configure ospf area 1.2.3.4 delete range 10.1.2.0/24
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
area identifier Specifies an OSPF area.
ipaddress Specifies an IP address.
mask Specifies a subnet mask.
To Next Page
Loading...