1928 ExtremeWare Software 7.3.0 Command Reference Guide
Power Over Ethernet Commands
show inline-power slot
show inline-power slot <slotlist>
Description
Displays inline power information for the specified slots.
Syntax Description
Default
N/A.
Usage Guidelines
The output displays the following inline power information for the specified slots:
• Common Power:
— Configured: Displays in watts the configured amount of common power available. This amount is
equal to the total amount of configured power minus the amount of configured reserved power.
— Allocated: Displays in watts the amount of common power allocated.
• Reserved Power:
— Configured: Displays in watts the amount of power configured as reserved.
— Allocated: Displays in watts the amount of reserved power utilized.
• Measured Usage—Displays measured power in watts.
Example
The following command displays inline power information for slot 1:
show inline-power slot 1
Following is sample output from this command:
Common Power Reserved Power
Slot Configured Allocated Configured Allocated Measured Usage
1 22000mW 5400mW 10000mW 10000mW 150 mW
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on Alpine series I/O modules only.
slotlist Specifies one or more slots.
To Next Page
Loading...