Extreme Networks ExtremeWare - Show Fdb Vpls

1978 ExtremeWare Software 7.3.0 Command Reference Guide
H-VPLS Commands
show fdb vpls
show fdb vpls {<vpls_name>} {peer [<ipaddress> | <host_name>]}
Description
Displays FDB information learned for VPLS.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays FDB information learned for VPLS. MAC addresses learned on both the egress
VLAN (if applicable) and VC-LSPs are displayed. Information displayed includes the MAC address,
VPLS name, egress VLAN (if applicable), VC-LSP peer, Age, and Port List. Optionally specifying the
vpls_name displays FDB information for the specified vpls only. If a VPLS peer qualifies the command,
only FDB information learned from the specified peer is displayed. The peer is specified using the
ipaddress or host_name parameter.
Example
None.
History
This command was first available in an ExtremeWare 7.3.0.
Platform Availability
This command is available on the BlackDiamond switch.
vpls_name Displays FDB information only for the specified vpls.
ipaddress Specifies the peer.
host_name Specifies the peer. Must be able to be resolved to an IP address.