disable sflow
ExtremeWare Software 7.3.0 Command Reference Guide 679
disable sflow
disable sflow
Description
Globally disables sFlow statistical packet sampling.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
This command disables sFlow globally on the switch. This command will not disable sFlow if it is
enabled on any ports. Per port sFlow must be disabled before executing this command by first using the
following command:
disable sflow ports
Example
The following command disables sFlow sampling globally:
disable sflow
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...