disable inline-power
ExtremeWare Software 7.3.0 Command Reference Guide 1911
disable inline-power
disable inline-power
Description
Shuts down power currently provided on all ports on all slots.
Syntax Description
This command has no arguments or variables.
Default
Enable.
Usage Guidelines
You can control whether inline power is provided to the system by using the disable inline-power
command and the enable inline-power command. Using the
disable inline-power
command shuts
down power currently provided on all ports on all slots. By default, inline power provided to the
system is enabled.
Example
The following command shuts down power currently provided on all ports on all slots:
disable inline-power
History
This command was first available in ExtremeWare 7.2.
Platform Availability
This command is available on Alpine series I/O modules only.
To Next Page
Loading...