configure access-profile delete
ExtremeWare Software 7.3.0 Command Reference Guide 769
configure access-profile delete
configure access-profile <access profile> delete <seq_number>
Description
Deletes an access profile entry using the sequence number.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command deletes the entry with sequence number 15 from the access profile AS1:
configure access-profile AS1 delete 15
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
access profile Specifies an access profile name.
seq-number Specifies the order of the entry within the access profile. If no sequence
number is specified, the new entry is added to the end of the access-profile
and is automatically assigned a value of 5 more than the sequence number of
the last entry.
To Next Page
Loading...