980 ExtremeWare Software 7.3.0 Command Reference Guide
EAPS Commands
configure eaps name
configure eaps <old_name> name <new_name>
Description
Renames an existing EAPS domain.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command renames EAPS domain “eaps-1” to “eaps-5”:
configure eaps eaps-1 name eaps-5
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on the “i” series platforms.
old_name Specifies the current name of an EAPS domain.
new_name Specifies a new name for the EAPS domain.
To Next Page
Loading...