show snmpv3 target-addr
ExtremeWare Software 7.3.0 Command Reference Guide 207
show snmpv3 target-addr
show snmpv3 target-addr {{hex} <addr name>}
Description
Display information about SNMPv3 target addresses.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display entries in the SNMPv3 snmpTargetAddressTable. If no target address is
specified, the entries for all the target addresses will be displayed.
Example
The following command displays the entry for the target address named A1:
show snmpv3 target-addr A1
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
hex Specifies that the value to follow is to be supplied as a colon separated string
of hex octets.
addr name Specifies a string identifier for the target address.
To Next Page
Loading...