514 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
configure slb vip service-check pop3
configure slb vip <vip name> service-check pop3 user <user name> password
{encrypted} {password}
Description
Configures layer 7 POP3 service checking for a specific virtual server.
Syntax Description
Default
N/A.
Usage Guidelines
This command automatically enables service checking.
If you do not enter a password, you are prompted for the password twice. Extreme Networks
recommends that you use a password.
The POP3 service check provides a more thorough check than ping check, because the POP3 service
check logs into the service.
To configure the frequency and timeout of service checks, use the following command:
configure slb global service-check
To configure the global parameters, use the following command:
configure slb global pop3
Example
The following command configures the service check to login using the user name “service” and the
password “check” to the virtual server “pop3vip”:
configure slb vip pop3vip service-check pop3 user service password check
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
vip name Specifies a virtual server.
user Specifies the user name that is checked.
password Specifies the password for the user name.
encrypted Encrypts the password stored in the configuration file.
To Next Page
Loading...