configure vlan dhcp-lease-timer
ExtremeWare Software 7.3.0 Command Reference Guide 843
configure vlan dhcp-lease-timer
configure vlan <name> dhcp-lease-timer <lease-timer>
Description
Configures the timer value in seconds returned as part of the DHCP response.
Syntax Description
Default
N/A.
Usage Guidelines
The timer value is specified in seconds.
The DHCP server should be used with Network Login and not as a stand-alone DHCP server.
Example
The following command configures the DHCP lease timer value for VLAN corp:
configure vlan corp dhcp-lease-timer <lease-timer>
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
name Specifies the VLAN on whose ports netlogin should be disabled.
lease-timer Specifies the timer value, in seconds.
To Next Page
Loading...