2072 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
show wireless configuration
show wireless configuration
Description
Displays the country, management VLAN, and gateway.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
Use this command to check the basic wireless configuration on a switch.
Examples
The following example displays information about the wireless configuration:
show wireless configuration
The output of the command is similar to:
Country Code: Extreme Default
Management VLAN: Default
Gateway: 192.168.0.1
Timed Command Information
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
To Next Page
Loading...