delete protocol
ExtremeWare Software 7.3.0 Command Reference Guide 339
delete protocol
delete protocol <protocol_name>
Description
Deletes a user-defined protocol.
Syntax Description
Default
N/A.
Usage Guidelines
If you delete a protocol that is in use by a VLAN, the protocol associated with than VLAN will become
“None.”
Example
The following command deletes a protocol named fred:
delete protocol fred
History
This command was first available in ExtremeWare 1.0.
Platform Availability
This command is available on all platforms.
protocol_name Specifies a protocol name.
To Next Page
Loading...