configure rip delete vlan
ExtremeWare Software 7.3.0 Command Reference Guide 1317
configure rip delete vlan
configure rip delete vlan [<vlan name> | all]
Description
Disables RIP on an IP interface.
Syntax Description
Default
All. If no VLAN is specified, then all is assumed.
Usage Guidelines
When an IP interface is created, RIP configuration is disabled on the interface by default. When the RIP
interface is disabled, the parameters are not reset to default automatically.
Example
The following command deletes RIP on a VLAN named finance:
configure rip delete finance
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
To Next Page
Loading...