528 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
disable slb failover
disable slb failover
Description
Disables the SLB failover mechanism.
Syntax Description
This command has no arguments or variables.
Default
SLB failover is disabled by default.
Usage Guidelines
To enable SLB failover, use the following command:
enable slb failover
Example
The following command disables SLB failover:
disable slb failover
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...