1876 ExtremeWare Software 7.3.0 Command Reference Guide
High Density Gigabit Ethernet Commands
disable flow-control ports
disable flow-control ports [<portlist> | all]
Description
Disables 802.3x flow control on
“3”
series ports.
Syntax Description
Default
Disabled.
Usage Guidelines
If you disable flow control, use the:
•
portlist
keyword to specify an individual
“3”
series port or a group of
“3”
series ports
•
all
keyword to specify all
“3”
series ports
If you disable flow control on a
“3”
series port, the port does not advertise flow control support during
auto-negotiation. Flow control is auto-negotiated and is disabled if both ports do not support it.
Example
The following command disables flow control on slot 2, ports 1 through 4:
disable flow-control ports 2:1-2:4
History
This command was first available in ExtremeWare 7.0.1.
Platform Availability
This command is available on
“3”
series I/O modules only.
portlist Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
all Specifies all
“3”
series ports.
To Next Page
Loading...