66 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Accessing the Switch
clear session
clear session <number>
Description
Terminates a Telnet, SSH, NetLogin, or Console session from the switch.
Syntax Description
Default
N/A.
Usage Guidelines
An administrator-level account can disconnect a management session that has been established by way
of a Telnet connection. You can determine the session number of the session you want to terminate by
using the
show session
command. The
show session
output displays information about current
Telnet sessions including:
• The session number
• The login date and time
• The user name
• The type of Telnet session
Depending on the software version running on your switch, additional session information may be
displayed. The session number is the first number displayed in the
show session
output.
Example
The following command terminates session 4 from the system:
clear session 4
History
This command was first available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
number Specifies a session number from show session output to terminate.
To Next Page
Loading...