2056 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
enable wireless ports interface ap-scan off-channel
enable wireless ports <portlist> interface [1 | 2] ap-scan off-channel [at
| every] <time>
Description
Starts the access point (AP) scan on the indicated interface at the specified time.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to schedule the off-channel AP scan. During an “off-channel” scan, the Altitude 300
is not available for user traffic.
Example
The following command enables port 23 using interface 1:
enable wireless ports 23 interface 1 ap-scan off-channel at 18
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
interface Specifies an interface: 1 or 2.
at Specifies a once-only start time for a scan.
every Specifies to start the scan every day at the specified time.
time Specifies the hour in the format (0-23)
To Next Page
Loading...