enable web http
ExtremeWare Software 7.3.0 Command Reference Guide 911
enable web http
enable web http
Description
Enables HTTP access to the switch on the default HTTP port (80).
Syntax Description
This command has no parameters or variables.
Default
Enabled.
Usage Guidelines
Use this command to enable HTTP access to the switch web pages.
Example
The following command enables HTTP on the default port:
enable web http
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
To Next Page
Loading...