disable arp-learning ports
ExtremeWare Software 7.3.0 Command Reference Guide 869
disable arp-learning ports
disable arp-learning ports <portlist>
Description
Disables the ARP-learning feature on a port or ports.
Syntax Description
Default
By default, arp-learning is enabled.
Usage Guidelines
None.
Example
N/A.
History
This command was first available in ExtremeWare 7.3.
Platform Availability
This command is available on all platforms.
portlist Specifies the ingress port(s) on which this rule is applied.
any specifies that the rule will be applied to all ports.
To Next Page
Loading...