Extreme Networks ExtremeWare User Manual

2166 ExtremeWare Software 7.3.0 Command Reference Guide
Troubleshooting Commands
configure debug-trace isis-cli
configure debug-trace isis-cli <level>
Description
Controls logging of debug messages related to CLI actions.
Syntax Description
Default
The default is 0.
Usage Guidelines
The debug level range is 0 to 5. Higher levels record more verbose messages. Higher levels also record
the messages recorded at lower levels.
History
This command was first available in ExtremeWare v6.1.8 IS-IS tech release and subsequently
incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on all platforms.
debug level Specifies a debug level. Following are the debug levels:
0 — Critical/Error Messages
1 — Warning Messages
2 — Concise Messages
3 — Verbose Messages
4 — Packet Dumps

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English