342 ExtremeWare Software 7.3.0 Command Reference Guide
VLAN Commands
disable mac-vlan port
disable mac-vlan port <portlist>
Description
Disables a port from using the MAC-based VLAN algorithm.
Syntax Description
Default
N/A.
Usage Guidelines
Disabling a port removes it from the MacVlanDiscover VLAN. But does not automatically return it to
the default VLAN. If you need this port to be a member of the default VLAN, you must explicitly add it
back.
Example
The following command disables ports 16 and 17 from using the MAC-based VLAN algorithm:
disable mac-vlan port 16,17
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
portlist A list of ports or slots and ports. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
To Next Page
Loading...
Need help?
General
