1390 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
unconfigure ospf
unconfigure ospf {vlan <vlan name> | area <area identifier>}
Description
Resets one or all OSPF interfaces to the default settings.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Example
The following command resets the OSPF interface to the default settings on the VLAN accounting:
unconfigure ospf accounting
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
vlan name Specifies a VLAN name.
area identifier Specifies an OSPF area.
To Next Page
Loading...