Extreme Networks ExtremeWare User Manual

450 ExtremeWare Software 7.3.0 Command Reference Guide
SLB Commands
configure flow-redirect timer ping-check
configure flow-redirect timer ping-check frequency <seconds> timeout
<seconds>
Description
Configures the flow redirect ping-check frequency and timeout.
Syntax Description
Default
The default frequency is 10 seconds.
The default timeout is 30 seconds.
Usage Guidelines
The frequency must be less than the timeout.
Example
The following command configures a flow redirect ping-check frequency of 5 seconds and a timeout of
15 seconds:
configure flow-redirect timer ping-check frequency 5 timeout 15
History
This command was first available in ExtremeWare 6.2.1.
Platform Availability
This command is available on all platforms.
frequency Specifies the ping-check frequency. The range is 1 to 60.
timeout Specifies the ping-check timeout. The range is 1 to 60.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English