Extreme Networks ExtremeWare User Manual

enable udp-echo-server
ExtremeWare Software 7.3.0 Command Reference Guide 1235
enable udp-echo-server
enable udp-echo-server
Description
Enables UDP echo server support.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
UDP Echo packets are used to measure the transit time for data between the transmitting and receiving
end.
Example
The following command enables UDP echo server support:
enable udp-echo-server
History
This command was available in ExtremeWare 6.2.1.
Platform Availability
This command is available on all platforms.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English