674 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Status Monitoring and Statistics
disable log debug-mode
disable log debug-mode
Description
Disables debug mode. The switch stops logging events of severity debug-summary, debug-verbose, and
debug-data.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
This command disables debug mode. Debug mode must be enabled prior to logging debug messages,
which can severely degrade performance. For typical network device monitoring, debug mode should
remain disabled, the default setting. Debug mode should only be enabled when advised by technical
support, or when advanced diagnosis is required. The debug mode setting is saved to FLASH.
Example
The following command disables debug mode:
disable log debug-mode
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...