1610 ExtremeWare Software 7.3.0 Command Reference Guide
ARM Commands
disable lpm
disable lpm
Description
Disables Selective-LPM.
Syntax Description
This command has no arguments or variables.
Default
Default is disabled.
Usage Guidelines
None.
Example
The following command disables the Selective-LPM feature:
disable lpm
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
To Next Page
Loading...