configure ipxsap add vlan
ExtremeWare Software 7.3.0 Command Reference Guide 1569
configure ipxsap add vlan
configure ipxsap add vlan [<vlan name> | all]
Description
Configures an IPX VLAN to run IPX/SAP routing.
Syntax Description
Default
N/A.
Usage Guidelines
If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is enabled
by default when the IPX VLAN is configured.
Example
The following command configures the IPX VLAN
accounting
to run IPX/SAP routing:
configure ipxsap add vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
all Specifies all VLANs.
To Next Page
Loading...