show mpls qos-mapping
ExtremeWare Software 7.3.0 Command Reference Guide 1841
show mpls qos-mapping
show mpls qos-mappings
Description
Displays MPLS-specified QoS mappings for dot1p-to-exp and exp-to-dot1p.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
Configured mappings for both dot1p-to-exp and exp-to-dot1p are displayed.
Example
The following command displays MPLS QoS mapping information:
show mpls qos-mappings
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
To Next Page
Loading...