Extreme Networks ExtremeWare User Manual

752 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Status Monitoring and Statistics
unconfigure sflow agent
unconfigure sflow agent
Description
Resets the sFlow agent IP address to the default value.
Syntax Description
This command has no arguments or variables.
Default
The default IP address is 0.0.0.0.
Usage Guidelines
This command resets the sFlow agent IP address to its default value.
Example
The following command resets the source IP address to 0.0.0.0 for UDP datagrams sent out by the sFlow
agent:
unconfigure sflow agent
History
This command was first available in ExtremeWare 7.3.0.
Platform Availability
This command is available on all platforms.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English