Extreme Networks ExtremeWare - Clear Ipmc Cache

clear ipmc cache
ExtremeWare Software 7.3.0 Command Reference Guide 1483
clear ipmc cache
clear ipmc cache {<IP multicast group> {<source IP address>/<netmask>}}
Description
Resets the IP multicast cache table.
Syntax Description
Default
If no options are specified, all IP multicast cache entries are flushed.
Usage Guidelines
This command can be used by network operators to manually remove IPMC hardware forwarding
cache entries instantly. If the source is available, caches will be re-created, otherwise caches are removed
permanently. This command can disrupt the normal forwarding of multicast traffic.
Example
The following command resets the IP multicast table for group 224.1.2.3:
clear ipmc cache 224.1.2.3
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
IP multicast group Specifies a group address.
source IP address Specifies a source IP address.
netmask Specifies a subnet mask.