Extreme Networks ExtremeWare - Unconfigure Mpls

unconfigure mpls
ExtremeWare Software 7.3.0 Command Reference Guide 1849
unconfigure mpls
unconfigure mpls
Description
Resets MPLS configuration parameters to the default settings.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
This command resets the following configuration parameters:
• IP-MTU
• LDP propagation filter settings on all VLANs
• LDP advertisement filter settings
• LDP session timers
• RSVP-TE interface parameters
• RSVP-TE profile parameters
• Settings for propagate-ip-ttl
• QoS mapping tables
Example
The following command resets MPLS configuration parameters to the default settings:
unconfigure mpls
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.