Extreme Networks ExtremeWare - Unconfigure Enhanced-Dos-Protect Ipfdb Agingtime

unconfigure enhanced-dos-protect ipfdb agingtime
ExtremeWare Software 7.3.0 Command Reference Guide 953
unconfigure enhanced-dos-protect ipfdb agingtime
unconfigure enhanced-dos-protect ipfdb agingtime ports <portlist>
Description
Resets aging time configuration for enhanced denial of service protection to default values for the
selected ports.
Syntax Description
Default
The default aging time is 30 seconds.
Usage Guidelines
Use this command to reset aging time to default values for selected untrusted ports. To verify
configuration, use the
show enhanced-dos-protect ipfdb ports <portlist> command and view
data in the Aging column.
Example
The following command resets the aging time on port 2 to the default value, 30 seconds:
unconfigure enhanced-dos-protect ipfdb agingtime ports 2
History
This command was first available in ExtremeWare 7.3.0
Platform Availability
This command is available on all platforms.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 3-5, 2:*, 2:5, 2:6-2:8.