Extreme Networks ExtremeWare User Manual

1570 ExtremeWare Software 7.3.0 Command Reference Guide
IPX Commands
configure ipxsap delete vlan
configure ipxsap delete vlan [<vlan name> | all]
Description
Disables IPX/SAP on an interface.
Syntax Description
Default
N/A.
Usage Guidelines
If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is enabled
by default when the IPX VLAN is configured.
Example
The following command disables IPX/SAP on VLAN accounting :
configure ipxsap delete vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all “i” series systems.
vlan name Specifies a VLAN name.
all Specifies all VLANs.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English