818 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
configure security-profile dot1x-wpa reauth-period
configure security-profile <name> dot1x-wpa reauth-period <seconds>
Description
When the network-authentication is set to dot1x or WPA, this command configures the interval when
clients are re-authenticated.
Syntax Description
Default
600 seconds.
Usage Guidelines
Use this command to change the re-authenticate interval time values for a security profile. Change
timers only when you do not want the client to be re-authenticated frequently.
Example
The following example sets the re-authentication interval for clients to 2 minutes:
configure security-profile open-profile dot1x-wpa reauth-period 120
History
This command was first available in ExtremeWare 6.2a and added to the “i” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
name Specifies the names of the security profile.
seconds Specifies the interval in seconds. Valid values are between 600 and 60000.
The default value is 600 seconds.
To Next Page
Loading...
Need help?
General
