1328 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
create ospf area
create ospf area <area identifier>
Description
Creates an OSPF area.
Syntax Description
Default
Area 0.0.0.0
Usage Guidelines
Area 0.0.0.0 does not need to be created. It exists by default.
Example
The following command creates an OSPF area:
create ospf area 1.2.3.4
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
area identifier Specifies an OSPF area.
To Next Page
Loading...