1176 ExtremeWare Software 7.3.0 Command Reference Guide
IP Unicast Commands
configure irdp
configure irdp <mininterval> <maxinterval> <lifetime> <preference>
Description
Configures the router advertisement message timers, using seconds.
Syntax Description
Default
N/A.
Usage Guidelines
All arguments need to be specified. All time intervals are in seconds.
An ICMP Router Discover Protocol (IRDP) client always uses the router with the highest preference
level. Change the preference setting to encourage or discourage the use of this router. The default
setting is 0.
Example
The following command configures the router advertisement message timers:
configure irdp 30 40 300 1
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
mininterval Specifies the minimum amount of time between router advertisements in
seconds. The default setting is 450 seconds.
maxinterval Specifies the maximum amount of time between router advertisements in
seconds. The default setting is 600 seconds.
lifetime Specifies the client aging time. The default setting is 1,800 seconds.
preference Specifies the preference level of the router. The default setting is 0.
To Next Page
Loading...
Need help?
General
