Extreme Networks ExtremeWare User Manual

1322 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
configure rip updatetime
configure rip updatetime {<seconds>}
Description
Specifies the time interval in seconds within which RIP sends update packets.
Syntax Description
Default
30 seconds.
Usage Guidelines
The router exchanges an update message with each neighbor every 30 seconds (default value), or if
there is a change to the overall routed topology (also called triggered updates). The timer granularity is 10
seconds.
Example
The following command sets the update timer to 60 seconds:
configure rip updatetime 60
History
This command was available in ExtremeWare 2.0.
Platform Availability
This command is available on all platforms.
seconds Specifies a time in seconds.

Extreme Networks ExtremeWare Specifications

General

Brand	Extreme Networks
Model	ExtremeWare
Category	Software
Language	English