1254 ExtremeWare Software 7.3.0 Command Reference Guide
IP Unicast Commands
unconfigure iparp
unconfigure iparp
Description
Resets IP ARP timeout, IP ARP max-entries, and IP ARP max-pending-entries to their default values.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
None.
Example
The following command resets all IP ARP related settings to the default values:
unconfigure iparp
History
This command was first available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
To Next Page
Loading...